Acta chirurgiae orthopaedicae
et traumatologiae Čechoslovaca

Acta Chir Orthop Traumatol Cech. 2009; 76(1):60-64 | DOI: 10.55095/achot2009/010

Custom-Designed 3D Tibial Augmentation for Knee ReplacementCase report

R. JIRMAN^1,3, P. VAVŘÍK², Z. HORÁK³

¹ Stomatologická klinika 1. LF UK a VFN, Praha

² I. ortopedická klinika 1. LF UK a FN Motol, Praha

³ Laboratoř biomechaniky, Fakulta strojní, ČVUT, Praha

Reconstruction with the use of custom-made implants aims at optimal replacement of lost or damaged bone structures and restoration of their funkction. In this study the development and construction of a custom-made implant and the operative technique used for the treatment of an extensive tibial defect are described.
The patient was a 65-year-old man treated for over 20 years for psoriatic arthritis and severe instability of the right knee, particularly in the frontal plane, with a worsening varus deformity. The radiogram showed an extensive destruction of the medial tibial condyle that also deeply involved the lateral condyle. The extent of defect made it impossible to use any commercial tibial augmentation. The geometry of the custom-designed implant for the medial tibial condyle was constructed on the basis of a 3D defect model and the shape of the medial tibial condyle of the collateral knee seen on CT scans. After its correct shape was verified on a plastic model, its coordinates were set in the software of a machine tool, and a titanium augmentation otherwise compatible with a standard knee replacement was produced. The use of such a custom implant to complete standard total knee arthroplasty has so far been demanding in terms of organisation and manufacture. Its production in the future could be facilitated by substituting titanium for plastic material such as poly-ether-ether-ketone (PEEK).

Keywords: custom-made implant, tibial augmentation, knee prosthesis

Accepted: July 15, 2008; Published: February 1, 2009  Show citation